Minor plate · oceanic crust

Nazca Plate

The Nazca Plate is an oceanic plate in the eastern Pacific, west of South America. It is born at the fast-spreading East Pacific Rise and sinks beneath South America at the Peru-Chile Trench, driving the growth of the Andes.

Area
16.1 million km²
Share of Earth
3.2%
Size rank
9 of 52
Avg boundary speed
7.9 cm/yr
Map showing the location of the Nazca Plate and its neighbors Nazca South American Cocos North Andes Altiplano Easter Juan Fernandez Galapagos Open on interactive map

Boundaries of the Nazca Plate

20,148 km of boundary in total: 36% convergent, 38% divergent, 26% transform. Speeds are relative motion between the two plates, from the PB2002 model.

Neighboring plate Boundary type Main features Shared length Relative speed
Pacific Plate Divergent Mid-ocean spreading ridge, Oceanic transform fault 4,433 km 12.5-15.1 cm/yr
South American Plate Convergent Subduction zone 4,297 km 7.0-8.1 cm/yr
Antarctic Plate Transform Oceanic transform fault, Mid-ocean spreading ridge 3,954 km 5.6-5.8 cm/yr
Cocos Plate Divergent Mid-ocean spreading ridge, Oceanic transform fault 3,030 km 4.0-6.7 cm/yr
North Andes Plate Convergent Subduction zone 1,329 km 5.3-6.1 cm/yr
Altiplano Plate Convergent Subduction zone 901 km 6.4-6.7 cm/yr
Easter Plate Divergent Mid-ocean spreading ridge, Oceanic transform fault 860 km 2.4-11.5 cm/yr
Juan Fernandez Plate Convergent Oceanic convergent boundary, Mid-ocean spreading ridge 551 km 1.0-11.2 cm/yr
Panama Plate Transform Oceanic transform fault, Oceanic convergent boundary 512 km 4.0-4.0 cm/yr
Galapagos Plate Divergent Mid-ocean spreading ridge, Oceanic convergent boundary 281 km 2.4-3.9 cm/yr

Where it is and what it carries

The Nazca Plate covers about 16.1 million square kilometers, or 3.2% of Earth’s surface, in the eastern Pacific Ocean between the East Pacific Rise and the west coast of South America. It is an oceanic plate. Its only land is volcanic: most of the Galapagos Islands of Ecuador, Easter Island and the Juan Fernandez Islands of Chile all sit on it.

The plate is named after the Nazca region of southern Peru. It carries several raised ridges of thickened crust left by hotspots, including the Carnegie Ridge east of the Galapagos and the Nazca Ridge, which meets the trench off southern Peru.

What happens at its edges

The western edge is the East Pacific Rise, where the Nazca Plate spreads away from the Pacific Plate at about 14 cm/yr on average and up to about 15 cm/yr. That is among the fastest seafloor spreading anywhere on Earth. Two small rotating plates sit along this ridge, the Easter Plate and the Juan Fernandez Plate.

The northern edge is the Galapagos Spreading Center, where the plate separates from the Cocos Plate at about 5.6 cm/yr. The southern edge is the Chile Rise, a ridge broken by long transform faults, where it moves away from the Antarctic Plate at about 5.7 cm/yr. In the northeast, the Panama Fracture Zone forms a transform boundary with the Panama Plate at about 4 cm/yr.

The eastern edge is the 4,297 km Peru-Chile Trench, also called the Atacama Trench, where the Nazca Plate sinks beneath the South American Plate at about 7.8 cm/yr. The same subduction continues beneath the Altiplano Plate (about 6.5 cm/yr) and the North Andes Plate (about 5.7 cm/yr). This steady convergence is what builds the Andes.

History

The Nazca Plate formed about 23 million years ago, when the old Farallon Plate split into the Cocos and Nazca plates. Since then it has kept spreading in the west and subducting in the east, so its oldest crust is the part now entering the trench. Where the Nazca Ridge reaches Peru, the slab sinks at a shallow angle, and the Andes above it have very few active volcanoes.

Earthquakes and volcanoes

The dataset lists 32 earthquakes of magnitude 6.5 or larger on the Nazca Plate itself since 1900, none of magnitude 8. The largest are two M7.4 events off Chile, in 1960 off Araucania and in 2010 west of Lebu, both close to the zones of much larger quakes on the overriding plate. Most great subduction earthquakes, including the 1960 Valdivia (M9.5) and 2010 Maule (M8.8) earthquakes, have epicenters on the South American side of the trench.

The plate holds 18 volcanoes in the dataset. The most active are the shield volcanoes of the Galapagos, such as Fernandina (last eruption 2024), Wolf (2022) and Sierra Negra (2018). Others are submarine vents along the East Pacific Rise.

Countries on the Nazca Plate

Share of each country's land area that lies on this plate.

Largest earthquakes on the Nazca Plate

32 earthquakes of magnitude 6.5 or more since 1900 had their epicenter on this plate. Data: USGS.

EarthquakeMagnitudeYearDepth
Off the coast of Araucania, Chile · Chile M7.4 1960 20 km
124 km W of Lebu, Chile · Chile M7.4 2010 35 km
Off the coast of Los Lagos, Chile · Chile M7.3 1919 15 km
Near the coast of Ecuador · Ecuador M7.2 1901 –
135 km W of Valparaíso, Chile · Chile M7.2 1981 33 km
56 km SSE of Cambutal, Panama · Panama M7.0 1943 20 km
Easter Island region M6.9 1996 10 km
178 km W of Taltal, Chile · Chile M6.9 1913 15 km

Volcanoes on the Nazca Plate

The Smithsonian Global Volcanism Program lists 18 Holocene volcanoes on this plate. The most recently active:

See all volcanoes on the live map

Frequently asked questions

Is the Nazca Plate oceanic or continental?

The Nazca Plate is made almost entirely of oceanic crust. It forms at spreading ridges on its western and northern sides and is consumed at the Peru-Chile Trench on its eastern side. The only land on it is volcanic islands such as the Galapagos Islands and Easter Island.

Are the Galapagos Islands on the Nazca Plate?

Mostly, yes. The Galapagos Islands sit just south of the Galapagos Spreading Center, the boundary between the Nazca and Cocos plates, so nearly all of the islands are on the Nazca Plate. Their volcanoes are fed by a mantle hotspot rather than by the plate edge.

What happened to the Farallon Plate?

The Nazca Plate is a remnant of the much larger Farallon Plate, which once lay between the Pacific Plate and the Americas. About 23 million years ago the Farallon Plate broke into the Cocos Plate in the north and the Nazca Plate in the south. Most of the original Farallon Plate has already subducted beneath the Americas.

Did the Nazca Plate cause the 1960 Chile earthquake?

Yes. The 1960 Valdivia earthquake (M9.5) ruptured the fault where the Nazca Plate sinks beneath South America. Its epicenter lies on the overriding South American Plate, so the quake is counted there in this site's data, but the Nazca Plate's subduction supplied the strain.

How big is the Nazca Plate?

The Nazca Plate covers about 16.1 million km² (6.22 million sq mi), roughly 3.2% of Earth's surface. That makes it the 9th largest of the 52 plates in the PB2002 model.

How fast does the Nazca Plate move?

Measured against its neighbors, the Nazca Plate moves at an average of 7.9 cm/yr (3.1 in/yr) along its boundaries. The fastest motion is against the Pacific Plate, where relative speeds reach 15.1 cm/yr on a divergent boundary.

What countries are on the Nazca Plate?

Countries partly on it: Ecuador and Panama. Shares are measured by land area using Natural Earth outlines.

What plates border the Nazca Plate?

The Nazca Plate shares boundaries with 10 plates: the Pacific Plate (divergent), the South American Plate (convergent), the Antarctic Plate (transform), the Cocos Plate (divergent), the North Andes Plate (convergent), the Altiplano Plate (convergent), the Easter Plate (divergent), the Juan Fernandez Plate (convergent), the Panama Plate (transform), the Galapagos Plate (divergent).

All 52 tectonic plates